Straight-side presses with
single and double connecting rod
-

T50 - T500

Technical information
-

Straight-side presses with single connecting rod
presse doppio montante - singola biella
Press
Model
Power
[KN]
Variable Stroke
[Colpi/min]
Stroke
[mm] - [in]
Table-Ram distance*
[mm] - [in]
Working table
[mm] - [in]
Ram surface
[mm] - [in]
T50 DM-SB (V) 500 80-200 12-110 (0,47-4,33) 320 (12,60) 800x600 (31,50x23,62) 800x420 (31,50x 16,53)
T50 DM-SB (R) 500 40-100 12-110 (0,47-4,33) 320 (12,60) 800x600 (31,50x23,62) 800x420 (31,50x 16,53)
T75 DM-SB (V) 750 60-150 14-140 (0,55-5,51) 350 (13,78) 900x650 (35,43x25,59) 900x470 (35,43x18,50)
T75 DM-SB (R) 800 40-100 14-150 (0,55-5,9) 400 (15,75) 1000x700 (39,37x27,56) 1000x700 (39,37x27,56)
T100 DM-SB 1000 30-75 17-180 (0,67-7,09) 460 (18,11) 1100x700 (43,31x27,56) 1100x700 (43,31x27,56)
T125 DM-SB 1250 28-70 16-200 (0,63-7,87) 500 (19,69) 1300x800 (51,18x31,50) 1300x800 (51,18x31,50)
T160 DM-SB 1600 24-60 15-220 (0,59-8,66) 500 (19,69) 1400x850 (55,12x33,46) 1400x850 (55,12x33,46)
T200 DM-SB 2000 22-56 19-230 (0,75-9,06) 550 (21,65) 1450x850 (57,09x33,46) 1450x850 (57,09x33,46)
T250 DM-SB 2500 20-50 15-220 (0,59-8,66) 550 (21,65) 1600x900 (62,99x35,43) 1600x900 (62,99x35,43)
T350 DM-SB 3500 20-50 20-250 (0,79-9,84) 600 (23,62) 1600x1000 (62,99x39,37) 1600x1000 (62,99x39,37)
T450 DM-SB 4500 20-50 250 (9,84) 600 (23,62) 1750x1200 (68,90x42,24) 1750x1200 (68,90x42,24)
Straight-side presses with double connecting rod
presse doppio montante - doppia biella
Press
Model
Power
[KN]
Variable Stroke
[Colpi/min]
Stroke
[mm] - [in]
Table-Ram distance*
[mm] - [in]
Working table
[mm] - [in]
Ram surface
[mm] - [in]
T125 DM-DB 1250 35-90 14-150 (0,55-5,91) 450 (17,72) 1300x800 (51,18x31,50) 1350x800 (53,15x31,50)
T160 DM-DB 1600 35-90 18-180 (0,71-7,09) 500 (19,69) 1500x900 (59,06x35,43) 1550x900 (61,02x35,43)
T200 DM-DB 2000 35-80 20-200 (0,79x7,87) 500 (19,69) 1700x1000 (66,93x39,37) 1750x1000 (68,90x39,37)
T250 DM-DB 2500 35-75 21-230 (0,83x9,06) 550 (21,65) 1900x1100 (74,80x43,31) 1950x1100 (76,77x43,31)
T315 DM-DB 3150 30-65 23-250 (0,91-9,84) 650 (25,59) 2100x1200 (82,68x47,24) 2150x1200 (84,65x47,24)
T400 DM-DB 4000 30-65 23-250 (0,91-9,84) 650 (25,59) 2300x1300 (90,55x51,18) 2350x1300 (92,52x51,18)
T500 DM-DB 5000 20-60 23-250 (0,91-9,84) 700 (27,56) 2550x1400 (100,39x55,12) 2600x1400 (102,36x55,12)
[*] Distance between table and ram lower bolster plate at Lower Dead Point with maximum stroke and ram regulation screw up.
[**] Double back-geared straight-side presses with double connecting rod

[*] Distance between table and ram lower bolster plate at Lower Dead Point with maximum stroke and ram regulation screw up.

[**] Double back-geared straight-side presses with double connecting rod

Straight-side presses: the versions of straight-side presses representstrong and solid machines, with essential design and structural rgidity, together with large dimensions of the working table and of the space between shoulders. All presses are produced and tested according to the structural analysis with Finite Element method (VIDEO). SANGIACOMO production range includes presses with single or double connecting rod, supplied with a series of optionals and customizations which can perfectly satisfy every customer’s need.

– Compliance with CE norms
– Steel frame
– Forged alloy steel shafts
– Combined clutch-brake unit with pneumatic and hydropneumatic control
– Control Panel with SIEMENS PLC
– Variable stroke chage with Numerical Control
– Automatic hydraulic overload
– Automatic press adjustments
– Automatic and centralized lubrication system with adjustable flow
– Tele-service

Double gear reduction presses

As a result of a complex system of eccentric gears with counter-rotation, which enables a double reduction in speed and very long available strokes, a high energy at very low nominal speed is obtained, which is ideal for deep drawing processes.

Link lever presses

By means of a kinematic lever system, which reduces the attack speed on the material and keeps it lower, steady and constant during the working phase, enables a process with less wear of the tools, less noise and the optimization of the production.

Servo presses

The combination of high torque servo motors and their management system, allowing to set the type of motion and speed curve with extreme precision, assures high performance suitable for operations of sheet metal forming, deep drawing and stamping, among the most varied and complex.

Pictures
-

Optionals
-

VARIABLE STROKE WITH NUMERICAL CONTROL

Allows press settings storage in “tool programs” (nearly 2000 programs). When recalling a tool program from the touch-screen panel, the press will be automatically set up (stroke change, speed, distance table-ram, electronic cams, etc..) in less than 2 minutes.

STRAIN GAUGES

FAST TOOLING

The need of reducing tooling times leads to the use of locking and handling systems which can guarantee perfect maintaning of the pre-set position during production and next replacement.

COMPLETE PRODUCTION PLANT

Upon request, we can supply complete feeding lines and turnkey solutions.

To provide the best possible service, we use cookies on this site. Continuing the navigation you consent to use them. OK Read more